At MyOwnConference, there are 2 variants of holding webinars. The first one is just using your web browser with no application installed locally, and the second one implies using a downloadable plugin. The second one is called Alternative technology.
Advantages of broadcasting using alternative technology:
- More stable connection during the webinar even when the Internet connectivity speed is low
- Possibility to host webinars in case of failure to do so using your web browser (the WebRTC technology is blocked or non-working)
This step-by-step guide offer steps to enabled Alternative technology.
Activate Alternative technology.
The system will offer to download a plugin. Proceed with the download because alternative technology works only after the installation.
Then, follow these steps:
- Wait till the download finishes;
- Unzip the archive and start the application;
- Press the Speak button.
Enabling the alternative technology on Windows OS based computers
After the plugin is downloaded, proceed to your Downloads
and unzip it.
Double click on it to start.
In the taskbar, the icon of the running plugin will appear.
Return to the webinar room and press the Speak button.
What should you do if an add-on is already installed, but the system asks you to download it again?
Follow the simple instructions.
1. Locate the Notepad.exe application on your desktop and run it as Administrator.
2. In Notepad, locate and open the hosts file. The path to this file is:
C:{Windows\System32\drivers\etc
3. Add text at the very bottom of the file, on a new line:
127.0.0.1 add-on.mywebinar.io
4. Save the file.
5. Refresh the webinar page and click the Speak button.
Enabling the technology on Mac OS based computers
Unzip the archive
and double click on it to start.
You may see the message informing you it is impossible to open the app.
In this case, keep the Control key pressed and right-click on the DTS app icon, then select Open from the context menu.
Press Open.
The app will be saved in the security exclusions list and further on you will be able to launch it by simply double-clicking, same as any registered app.
After this, return to the webinar room and press the Speak button.
What to do if the add-on is already installed on your Mac, but the system asks you to download it again?
Follow the simple instruction.
Find and run the Terminal on your desktop. There are several ways to do this.
1) In the Spotlight search bar, enter the word Terminal and press enter. This will bring up a Terminal window.
2) Launch Terminal in the Finder.
3) Among the utilities, find Terminal and run it.
2. In the Terminal window, run the command:
sudo nano etc/hosts
3. After the command, add at the very bottom a new line of text:
127.0.0.1 add-on.mywebinar.io
4. Save the changes:
1) to save the file, press Control-O;
2) to exit, press Control-X.
5. Refresh the webinar page and click the Speak button.
If you encounter any difficulties broadcasting with the alternative technology enabled, feel free to contact our technical support via your preferred means of communication.